Send your logging data with our Log API

If our log forwarding solutions don't meet your needs, you can use our Log API to send log data directly to New Relic via an HTTP endpoint.

HTTP endpoint

Use the endpoint that's applicable for your New Relic account:

United States (US) endpoint:

https://log-api.newrelic.com/log/v1

European Union (EU) endpoint:

https://log-api.eu.newrelic.com/log/v1

FedRAMP endpoint:

https://gov-log-api.newrelic.com/log/v1

HTTP setup

To send log data to your New Relic account via the Log API:

Get your .
Review the limits and restricted characters for your JSON payload.
Generate the JSON message using the required headers and body fields.
Ensure that your Api-Key or License-Key is included in your headers or query parameters. Refer to the log JSON examples.
Send your JSON message to the appropriate HTTP endpoint for your New Relic account in a POST request.
- US: https://log-api.newrelic.com/log/v1
- EU: https://log-api.eu.newrelic.com/log/v1
- FedRAMP: https://gov-log-api.newrelic.com/log/v1
Generate some traffic and wait a few minutes, then check your account for data.

If no data appears after you enable our capabilities, follow our troubleshooting procedures.

HTTP headers

When creating your HTTP headers, use these guidelines:

Header	Supported values
`Content-Type` Required	`application/json` `json` `application/gzip` `gzip`

Header

Supported values

Content-Type

Required

application/json
json
application/gzip
gzip

Gzipped JSON formatting is accepted. If sending compressed JSON, please include the Content-Type: application/json and Content-Encoding: gzip headers.

Authentication

Your serves to authenticate your request to the Log API, and determines the New Relic account where your submitted log message(s) will be written. It needs to be passed as either an HTTP header or a query string parameter.

Option 1: Authenticate using HTTP header

Pass your license key by adding a custom HTTP header as described below:

Header	Supported values
`Api-Key`	A New Relic . You can also send this via query parameter.

Option 2: Authenticate using query string parameter ("headerless" authentication)

The license key can also be passed as a query string parameter in the URL. This is useful when sending logs from cloud-based sources that don't allow custom HTTP request headers.

Example: https://LOG_API_ENDPOINT/log/v1?Api-Key=YOUR_API_KEY_HERE

Query parameter	Value
`Api-Key`	Your . You can also send this via HTTP header.

JSON body

You can send your JSON message using either a simplified or detailed set of attributes:

When using the simplified format to create your JSON message, send a single JSON object with the following:

Field	Value type	Format	Required	Notes
`"timestamp"`	Integer, String	Milliseconds or seconds since epoch (when set as an integer), or ISO8601-formatted timestamp (when set as a string)	No	If this field is not present or incorrectly specified, the message will be timestamped using the ingest time
`"message"`	(any -- but String is recommended. See the list of supported attribute types)	any	No	This is the main log message field that is searched by default
`"logtype"`	String	any string	No	Primary field for identifying logs and matching parsing rules
Other fields	(any -- see the list of supported attribute types)	any	No	These will become attributes of the log message.

When using the detailed format to create your body, it must be a JSON array containing one or more JSON objects, each of which with the following format:

Field	Value type	Format	Required	Notes
`"common"`	Object	See common.	No	Any attributes that are common to all log messages
`"logs"`	Array	See logs.	Yes	Array with the log entries

Supported attribute types

Attributes may be of any of the following types:

Type in the JSON request	Type stored in the New Relic database
`boolean`	`boolean`
`integer`	`integer`
`long`	`long`
`float`	`float`
`double`	`double`
`string`	`string` (Note that if a string value is stringified JSON, it will be parsed and its fields extracted as variables. See JSON message attribute parsing)
Array	(unsupported)

Limits and restricted characters

Advertencia

Avoid calling our API from within the code of a customer-facing application. This can cause performance issues or block your application if response time is slow. If you need to do it this way, call our API asynchronously to avoid these performance issues.

Restrictions on logs sent to the Log API:

Payload total size: 1MB(10^6 bytes) maximum per POST. We highly recommend using compression.
The payload must be encoded as UTF-8.
Number of attributes per event: 255 maximum.
Length of attribute name: 255 characters.
Length of attribute value: The first 4,094 characters are stored in NRDB as a Log event field with the same name, such as message. If the string value exceeds 4,094 characters, we store the long string as a blob.

Some specific attributes have additional restrictions:

accountId: This is a reserved attribute name. If it is included, it will be dropped during ingest.
appId: Must be an integer. When using a non-integer data type, the data will be ingested but becomes unqueryable.
entity.guid, entity.name, and entity.type: These attributes are used internally to identify entities. Any values submitted with these keys in the attributes section of a metric data point may cause undefined behavior such as missing entities in the UI or telemetry not associating with the expected entities. For more information please refer to Entity synthesis.
eventType: This is a reserved attribute name. If it is included, it will be dropped during ingest.
timestamp: Must be a Unix epoch timestamp (either in seconds or in milliseconds) or an ISO8601-formatted timestamp.

Importante

Payloads with timestamps older than 48 hours may be dropped.

Rate limits on logs sent to the Log API:

Maximum rate for HTTP requests sent to the Log API: 300,000 requests per minute
Maximum rate of uncompressed Log JSON bytes sent to the Log API: 10 GB per minute

Rate limit violations

Exceeding rate limits affects how the Log API behaves. Follow these instructions if this happens.

When the maximum request rate limit is exceeded for an account, the New Relic Log API returns a 429 response for the remainder of the minute. This response includes a Retry-After header indicating how long to wait in seconds before resubmitting or sending new data.

To resolve this issue, either reduce the number of data points you are sending, or request a rate limit change. Subsequent subscription changes do not impact modified rate limits. If an account change impacts your rate limit, you must notify us to adjust your rate limit.

To request rate limit changes, contact your New Relic account representative, or visit our Support portal.

When the maximum Log JSON byte limit is exceeded for an account, the New Relic Log API returns a 429 response for the remainder of the minute. This response includes a Retry-After header indicating how long to wait in seconds before resubmitting or sending new data.

To resolve this issue, try to reduce the amount of log data you are sending, or spread it out over a larger period of time.

To request rate limit changes, contact your New Relic account representative, or visit our Support portal.

Log payload format

We accept any valid JSON payload. The payload must encoded as UTF-8.

JSON message attributes

This is a block containing attributes that will be common to all log entries in logs:

Field	Value type	Format	Required	Notes
`"timestamp"`	Integer, String	Milliseconds or seconds since epoch (when set as an integer), or ISO8601-formatted timestamp (when set as a string)	No	Message timestamp default to ingest time
`"attributes"`	Object	JSON	No	This sub-object contains all other attributes of the message

This is an array containing log entries with the following format:

Field	Value type	Format	Required	Notes
`"timestamp"`	Integer, String	Milliseconds or seconds since epoch (when set as an integer), or ISO8601-formatted timestamp (when set as a string)	No	Message timestamp default to ingest time
`"attributes"`	Object	JSON	No	This sub-object contains all other attributes of the message
`"message"`	(any -- but String is recommended. See the list of supported attribute types)	(any)	Yes	This is the main log message field that is searched by default
`"log"`	String	(any string)	No	We will rewrite this string as the field `message` on ingest
`"LOG"`	String	(any string)	No	We will rewrite this string as the field `message` on ingest
`"MESSAGE"`	String	(any string)	No	We will rewrite this string as the field `message` on ingest
`"msg"`	String	(any string)	No	We will rewrite this string as the field `message` on ingest

JSON message attribute parsing

Our log management capabilities will parse any message attribute as JSON. The resulting JSON attributes in the parsed message will be added to the event. If the message attribute is not JSON, it is left as is.

Here is an example message attribute:

{
  "timestamp": 1562767499238,
  "message": "{\"service-name\": \"login-service\", \"user\": {\"id\": 123, \"name\": \"alice\"}}"
}

This will be treated as:

{
  "timestamp": 1562767499238,
  "service-name": "login-service",
  "user": {
    "id": 123,
    "name": "alice"
  }
}

Log JSON examples

Attributes can be scalar JSON types like string and number. They can also be compound (or nested) objects. Compound attributes will have their associated attributes stored with flattened names.

For example, here is a compound user attribute in a log entry's attributes:

"attributes": {
    "action": "login",
    "user": {
        "id": 123,
        "name": "alice"
    }
}

This will result in the following attributes being stored with the log event:

Attribute	Value
`"action"`	`"login"`
`"user.id"`	`123`
`"user.name"`	`"alice"`

Log POST message example

Log POST message example:

bash

$POST /log/v1 HTTP/1.1
$Host: log-api.newrelic.com
$Content-Type: application/json
$Api-Key: <YOUR_LICENSE_KEY>
$Accept: */*
$Content-Length: 319
$[{
$   "common": {
$     "attributes": {
$       "logtype": "accesslogs",
$       "service": "login-service",
$       "hostname": "login.example.com"
$     }
$   },
$   "logs": [{
$       "timestamp": <TIMESTAMP_IN_UNIX_EPOCH_OR_IS08601_FORMAT>,
$       "message": "User 'xyz' logged in"
$     },{
$       "timestamp": <TIMESTAMP_IN_UNIX_EPOCH_OR_IS08601_FORMAT>,
$       "message": "User 'xyz' logged out",
$       "attributes": {
$         "auditId": 123
$       }
$     }]
$}]

This POST message would result in the following log messages being stored in New Relic:

Attribute	Value
`"logtype"`	`"accesslogs"`
`"service"`	`"login-service"`
`"hostname"`	`"login.example.com"`

Here's an example of stored logs block attributes:

Attribute	Value
`"timestamp"`	`1550086450124`
`"message"`	`"User 'xyz' logged out"`
`"auditId"`	`123`

JSON POST request example

Here's an example of a JSON POST request:

bash

$POST /log/v1 HTTP/1.1
$Host: log-api.newrelic.com
$Content-Type: application/json
$Api-Key: <YOUR_LICENSE_KEY>
$Accept: */*
$Content-Length: 133
${
$    "timestamp": <TIMESTAMP_IN_UNIX_EPOCH_OR_IS08601_FORMAT>,
$    "message": "User 'xyz' logged in",
$    "logtype": "accesslogs",
$    "service": "login-service",
$    "hostname": "login.example.com"
$}

What's next?

Explore logging data across your platform.

Get deeper visibility into both your application and your platform performance data by forwarding your logs with our logs in context capabilities.
Set up alerts.
Query your data and create dashboards.

Send your logging data with our Log API

HTTP endpoint

HTTP setup

HTTP headers

Authentication

Option 1: Authenticate using HTTP header

Option 2: Authenticate using query string parameter ("headerless" authentication)

JSON body

Simplified JSON body message

Detailed JSON body message

Supported attribute types

Limits and restricted characters

Advertencia

Importante

Rate limit violations

HTTP requests per minute

JSON bytes per minute

Log payload format

JSON message attributes

Common block attributes

Logs block attributes

JSON message attribute parsing

Log JSON examples

Log POST message example

JSON POST request example

What's next?

Send your logging data with our Log API

HTTP endpoint .css-21sua1{background:none;border:none;width:0;padding:0;}

HTTP setup

HTTP headers

Authentication

Option 1: Authenticate using HTTP header

Option 2: Authenticate using query string parameter ("headerless" authentication)

JSON body

Detailed JSON body message

Supported attribute types

Limits and restricted characters

Advertencia

Importante

Rate limit violations

HTTP requests per minute

JSON bytes per minute

Log payload format

JSON message attributes

Common block attributes

Logs block attributes

JSON message attribute parsing

Log JSON examples

Log POST message example

JSON POST request example

What's next?

HTTP endpoint