Ruby agent release notesRSS

v8.3.0

• Updated the agent to support Ruby 3.1.0

  Most of the changes involved updating the multiverse suite to exclude runs for older versions of instrumented gems that are not compatible with Ruby 3.1.0. In addition, Infinite Tracing testing was updated to accommodate YAML::unsafe_load for Psych 4 support.

• Bugfix: Update AdaptiveSampler#sampled? algorithm

  One of the clauses in AdaptiveSampler#sampled? would always return false due to Integer division returning a result of zero. This method has been updated to use Float division instead, to exponentially back off the number of samples required. This may increase the number of traces collected for transactions. A huge thank you to @romul for bringing this to our attention and breaking down the problem!

• Bugfix: Correctly encode ASCII-8BIT log messages

  The encoding update for the DecoratingLogger in v8.2.0 did not account for ASCII-8BIT encoded characters qualifying as valid_encoding?. Now, ASCII-8BIT characters will be encoded as UTF-8 and include replacement characters as needed. We're very grateful for @nikajukic's collaboration and submission of a test case to resolve this issue.

Support statement

New Relic recommends that you upgrade the agent regularly and at a minimum every 3 months. As of this release, the oldest supported version is 5.6.0.349.

v8.2.0

• New instrumentation for Tilt gem

  Template rendering using Tilt is now instrumented. Tilt 2.x is supported for Ruby versions 2.2 and above and 1.x is supported for Ruby versions below 2.7. See PR #847 for details.

• Configuration error_collector.ignore_errors is marked as deprecated

  This setting has been marked as deprecated in the documentation since version 7.2.0 and is now flagged as deprecated within the code.

• Remove Rails 2 instrumentation

  Though any version of Rails 2 has not been supported by the Ruby agent since v3.18.1.330, instrumentation for ActionController and ActionWebService specific to that version were still part of the agent. This instrumentation has been removed.

• Remove duplicated settings from newrelic.yml

  Thank you @jakeonfire for bringing this to our attention and @kuroponzu for making the changes!

• Bugfix: Span events recorded when using newrelic_ignore

  Previously, the agent was incorrectly recording span events only on transactions that should be ignored. This fix will prevent any span events from being created for transactions using newrelic_ignore, or ignored through the rules.ignore_url_regexes configuration option.

• Bugfix: Print deprecation warning for cross-application tracing if enabled

  Prior to this change, the deprecation warning would log whenever the agent started up, regardless of configuration. Thank you @alpha-san for bringing this to our attention!

• Bugfix: Scrub non-unicode characters from DecoratingLogger

  To prevent JSON::GeneratorErrors, the DecoratingLogger replaces non-Unicode characters with the replacement character: �. Thank you @jdelStrother for bringing this to our attention!

• Bugfix: Distributed tracing headers emitted errors when agent was not connected

  Previously, when the agent had not yet connected it would fail to create a trace context payload and emit an error, "TypeError: no implicit conversion of nil into String," to the agent logs. The correct behavior in this situation is to not create these headers due to the lack of required information. Now, the agent will not attempt to create trace context payloads until it has connected. Thank you @Izzette for bringing this to our attention!

Support statement

New Relic recommends that you upgrade the agent regularly and at a minimum every 3 months. As of this release, the oldest supported version is 5.5.0.348.

v8.1.0

• Instrumentation for Ruby standard library Logger

  The agent will now automatically instrument Logger, recording number of lines and size of logging output, with breakdown by severity.

• Bugfix for Padrino instrumentation

  A bug was introduced to the way the agent installs padrino instrumentation in 7.0.0. This release fixes the issues with the padrino instrumentation. Thanks to @sriedel for bringing this issue to our attention.

• Bugfix: Stop deadlocks between New Relic thread and Delayed Job sampling thread

  Running the agent's polling queries for the DelayedJobSampler within the same ActiveRecord connection decreases the frequency of deadlocks in development environments. Thanks @jdelStrother for bringing this to our attention and providing excellent sample code to speed up development!

• Bugfix: Allow Net::HTTP request to IPv6 addresses

  The agent will no longer raise an URI::InvalidURIError error if an IPv6 address is passed to Net::HTTP. Thank you @tristinbarnett and @tabathadelane for crafting a solution!

• Bugfix: Allow integers to be passed to error_collector.ignore_status_codes configuration

  Integers not wrapped in quotation marks can be passed to error_collector.ignore_status_codes in the newrelic.yml file. Our thanks goes to @elaguerta and @brammerl for resolving this issue!

• Bugfix: allow add_method_tracer to be used on BasicObjects

  Previously, our add_method_tracer changes referenced self.class which is not available on BasicObjects. This has been fixed. Thanks to @toncid for bringing this issue to our attention.

Support statement

New Relic recommends that you upgrade the agent regularly and at a minimum every 3 months. As of this release, the oldest supported version is 5.4.0.347.

v8.0.0

• add_method_tracer refactored to use prepend over alias_method chaining

  This release overhauls the implementation of add_method_tracer, as detailed in issue #502. The main breaking updates are as follows:

  • A metric name passed to add_method_tracer will no longer be interpolated in an instance context as before. To maintain this behavior, pass a Proc object with the same arity as the method being traced. For example:

    # OLD
      add_method_tracer :foo, '#{args[0]}.#{args[1]}'
    
      # NEW
      add_method_tracer :foo, -> (*args) { "#{args[0]}.#{args[1]}" }

    카피

  • Similarly, the :code_header and :code_footer options to add_method_tracer will only accept a Proc object, which will be bound to the calling instance when the traced method is invoked.

  • Calling add_method_tracer for a method will overwrite any previously defined tracers for that method. To specify multiple metric names for a single method tracer, pass them to add_method_tracer as an array.

  See updated documentation on the following pages for full details:

  • Ruby Custom Instrumentation: Method Tracers
  • MethodTracer::ClassMethods#add_method_tracer

• Distributed tracing is enabled by default

  Distributed tracing tracks and observes service requests as they flow through distributed systems. Distributed tracing is now enabled by default and replaces cross application tracing.

• Bugfix: Incorrectly loading configuration options from newrelic.yml

  The agent will now import the configuration options error_collector.ignore_messages and error_collector.expected_messages from the newrelic.yml file correctly.

• Cross Application is now deprecated, and disabled by default

  Distributed tracing is replacing cross application tracing as the default means of tracing between services. To continue using it, enable it with cross_application_tracer.enabled: true and distributed_tracing.enabled: false

• Update configuration option default value for span_events.max_samples_stored from 1000 to 2000

  For more information about this congfiguration option, visit the Ruby agent documentation.

• Agent now enforces server supplied maximum value for configuration option span_events.max_samples_stored

  Upon connection to the New Relic servers, the agent will now enforce a maximum value allowed for the configuration option span_events.max_samples_stored sent from the New Relic servers.

• Remove Ruby 2.0 required kwarg compatibility checks

  Our agent has code that provides compatibility for required keyword arguments in Ruby versions below 2.1. Since the agent now only supports Ruby 2.2+, this code is no longer required.

• Replace Time.now with Process.clock_gettime

  Calls to Time.now have been replaced with calls to Process.clock_gettime to leverage the system's built-in clocks for elapsed time (Process::CLOCK_MONOTONIC) and wall-clock time (Process::CLOCK_REALTIME). This results in fewer object allocations, more accurate elapsed time records, and enhanced performance. Thanks to @sdemjanenko and @viraptor for advocating for this change!

• Updated generated default newrelic.yml

  Thank you @wyhaines and @creaturenex for your contribution. The default newrelic.yml that the agent can generate is now updated with commented out examples of all configuration options.

• Bugfix: Psych 4.0 causes errors when loading newrelic.yml

  Psych 4.0 now uses safe load behavior when using YAML.load which by default doesn't allow aliases, causing errors when the agent loads the config file. We have updated how we load the config file to avoid these errors.

• Remove support for Excon versions below 0.19.0

  Excon versions below 0.19.0 will no longer be instrumented through the Ruby agent.

• Remove support for Mongo versions below 2.1

  Mongo versions below 2.1 will no longer be instrumented through the Ruby agent.

• Remove tests for Rails 3.0 and Rails 3.1

  As of the 7.0 release, the Ruby agent stopped supporting Rails 3.0 and Rails 3.1. Despite this, we still had tests for these versions running on the agent's CI. Those tests are now removed.

• Update test Gemfiles for patched versions

  The gem has individual Gemfiles it uses to test against different common user setups. Rails 5.2, 6.0, and 6.1 have been updated to the latest patch versions in the test Gemfiles. Rack was updated in the Rails61 test suite to 2.1.4 to resolve a security vulnerability.

• Remove Merb Support

  This release removes the remaining support for the Merb framework. It merged with Rails during the 3.0 release. Now that the Ruby agent supports Rails 3.2 and above, we thought it was time to say goodbye.

• Remove deprecated method External.start_segment

  The method NewRelic::Agent::External.start_segment has been deprecated as of Ruby Agent 6.0.0. This method is now removed.

• Added testing and support for the following gem versions

  • activemerchant 1.121.0
  • bunny 2.19.0
  • excon 0.85.0
  • mongo 2.14.0, 2.15.1
  • padrino 0.15.1
  • resque 2.1.0
  • sequel 5.48.0
  • yajl-ruby 1.4.1

• This version adds support for ARM64/Graviton2 platform using Ruby 3.0.2+

Support statement

New Relic recommends that you upgrade the agent regularly and at a minimum every 3 months. As of this release, the oldest supported version is 5.4.0.347.

v7.2.0

• Expected Errors and Ignore Errors This release adds support for configuration of expected/ignored errors by class name, status code, and message. The following configuration options are now available:

  • error_collector.ignore_classes
  • error_collector.ignore_messages
  • error_collector.ignore_status_codes
  • error_collector.expected_classes
  • error_collector.expected_messages
  • error_collector.expected_status_codes For more details about expected and ignored errors, please see our configuration documentation

• Bugfix: resolves "can't add a new key into hash during iteration" Errors

  Thanks to @wyhaines for this fix that prevents "can't add a new key into hash during iteration" errors from occuring when iterating over environment data.

• Bugfix: kwarg support fixed for Rack middleware instrumentation

  Thanks to @walro for submitting this fix. This fixes the rack instrumentation when using kwargs.

• Update known conflicts with use of Module#Prepend

  With our release of v7.0.0, we updated our instrumentation to use Module#Prepend by default, instead of method chaining. We have received reports of conflicts and added a check for these known conflicts. If a known conflict with prepend is detected while using the default value of 'auto' for gem instrumentation, the agent will instead install method chaining instrumentation in order to avoid this conflict. This check can be bypassed by setting the instrumentation method for the gem to 'prepend'.

Support statement

New Relic recommends that you upgrade the agent regularly and at a minimum every 3 months. As of this release, the oldest supported version is 5.2.0.345.

v7.1.0

• Add support for CSP nonces when using our API to insert the Browser agent

  We now support passing in a nonce to our API method browser_timing_header to allow the Browser agent to run on applications using CSP nonces. This allows users to inject the Browser agent themselves and use the nonce required for the script to run. In order to utilize this new feature, you must disable auto instrumentation for the Browser agent, and use the API method browser_timing_header to pass the nonce in and inject the script manually.

• Removed MD5 use in the SQL sampler

  In order to allow the agent to run in FIPS compliant environments, the usage of MD5 for aggregating slow sql traces has been replaced with SHA1.

• Enable server-side configuration of distributed tracing

  distributed_tracing.enabled may now be set in server-side application configuration.

• Bugfix: Fix for missing part of a previous bugfix

  Our previous fix of "nil Middlewares injection now prevented and gracefully handled in Sinatra" released in 7.0.0 was partially overwritten by some of the other changes in that release. This release adds back those missing sections of the bugfix, and should resolve the issue for Sinatra users.

• Update known conflicts with use of Module#Prepend

  With our release of v7.0.0, we updated our instrumentation to use Module#Prepend by default, instead of method chaining. We have received reports of conflicts and added a check for these known conflicts. If a known conflict with prepend is detected while using the default value of 'auto' for gem instrumentation, the agent will instead install method chaining instrumentation in order to avoid this conflict. This check can be bypassed by setting the instrumentation method for the gem to 'prepend'.

• Bugfix: Updated support for ActiveRecord 6.1+ instrumentation

  Previously, the agent depended on connection_id to be present in the Active Support instrumentation for sql.active_record to get the current ActiveRecord connection. As of Rails 6.1, connection_id has been dropped in favor of providing the connection object through the connection value exclusively. This resulted in datastore spans displaying fallback behavior, including showing "ActiveRecord" as the database vendor.

• Bugfix: Updated support for Resque's FORK_PER_JOB option

  Support for Resque's FORK_PER_JOB flag within the Ruby agent was incomplete and nonfunctional. The agent should now behave correctly when running in a non-forking Resque worker process.

• Bugfix: Added check for ruby2_keywords in add_transaction_tracer

  Thanks @beauraF for the contribution! Previously, the add_transaction_tracer was not updated when we added support for ruby 3. In order to correctly support **kwargs, ruby2_keywords was added to correctly update the method signature to use **kwargs in ruby versions that support that.

• Confirmed support for yajl 1.4.0

  Thanks to @creaturenex for the contribution! yajl-ruby 1.4.0 was added to our test suite and confirmed all tests pass, showing the agent supports this version as well.

Support statement

New Relic recommends that you upgrade the agent regularly and at a minimum every 3 months. As of this release, the oldest supported version is 5.2.0.345.

v7.0.0

• Ruby Agent 6.x to 7.x Migration Guide Available

  Please see our Ruby Agent 6.x to 7.x migration guide for helpful strategies and tips for migrating from earlier versions of the Ruby agent to 7.0.0. We cover new configuration settings, diagnosiing and installing SSL CA certificates and deprecated items and their replacements in this guide.

• Ruby 2.0 and 2.1 dropped

  Support for Ruby 2.0 and 2.1 dropped with this release. We do not know of code changes that would prevent the agent from continuing to work with these releases. However, Rubies 2.0 and 2.1 are no longer included in our test matrices and are not supported for 7.0.0 and onward.

• Implemented prepend auto-instrumentation strategies for most Ruby gems/libraries

  This release brings the auto-instrumentation strategies for most gems into the modern era for Ruby by providing both prepend and method-chaining (also known as method-aliasing) strategies for auto instrumenting. Prepend, which has been available since Ruby 2.0, is now the default strategy employed in auto-instrumenting. It's a known issue that some external gems lead to Stack Level too Deep exceptions when prepend and method-chaining are mixed. In such known cases, the auto-instrumenting strategy will fall back to method-chaining automatically.

  This release also deprecates many overlapping and inconsistently named configuration settings in favor of being able to control behavior of instrumentation per library with one setting that can be one of auto (the default), disabled, prepend, or chain.

  Please see the above-referenced migration guide for further details.

• Removed SSL cert bundle

  The agent will no longer ship this bundle and will rely on system certs.

• Removed deprecated config options

  The following config options were previously deprecated and are no longer available:

  • disable_active_record_4
  • disable_active_record_5
  • autostart.blacklisted_constants
  • autostart.blacklisted_executables
  • autostart.blacklisted_rake_tasks
  • strip_exception_messages.whitelist

• Removed deprecated attribute

  The attribute httpResponseCode was previously deprecated and replaced with http.statusCode. This deprecated attribute has now been removed.

• Removed deprecated option in notice_error

  Previously, the :trace_only option to NewRelic::Agent.notice_error was deprecated and replaced with :expected. This deprecated option has been removed.

• Removed deprecated API methods

  Previously the API methods create_distributed_trace_payload and accept_distributed_trace_payload were deprecated. These have now been removed. Instead, please see insert_distributed_trace_headers and accept_distributed_trace_headers, respectively.

• Bugfix: Prevent browser monitoring middleware from installing to middleware multiple times

  In rare cases on jRuby, the BrowserMonitoring middleware could attempt to install itself multiple times at start up. This bug fix addresses that by using a mutex to introduce thread safety to the operation. Sinatra in particular can have this race condition because its middleware stack is not installed until the first request is received.

• Skip constructing Time for transactions

  Thanks to @viraptor, we are no longer constructing an unused Time object with every call to starting a new Transaction.

• Bugfix: nil Middlewares injection now prevented and gracefully handled in Sinatra

  Previously, the agent could potentially inject multiples of an instrumented middleware if Sinatra received many requests at once during start up and initialization due to Sinatra's ability to delay full startup as long as possible. This has now been fixed, and the Ruby agent correctly instruments only once as well as gracefully handles nil middleware classes in general.

• Bugfix: Ensure transaction nesting max depth is always consistent with length of segments

  Thanks to @warp for noticing and fixing the scenario where Transaction nesting_max_depth can get out of sync with segment length resulting in an exception when attempting to nest the initial segment which does not exist.

Support statement

New Relic recommends that you upgrade the agent regularly and at a minimum every 3 months. As of this release, the oldest supported version is 4.8.0.

v6.15.0

• Official Ruby 3.0 support

  The Ruby agent has been verified to run on Ruby 3.0.0.

• Added support for Rails 6.1

  The Ruby agent has been verified to run with Rails 6.1. Special thanks to @hasghari for setting this up!

• Added support for Sidekiq 6.0, 6.1

  The Ruby agent has been verified to run with both 6.0 and 6.1 versions of sidekiq.

• Bugfix: No longer overwrites sidekiq trace data

  Distributed tracing data is now added to the job trace info rather than overwriting the existing data.

• Bugfix: Fixes cases where errors are reported for spans with no other attributes

  Previously, in cases where a span does not have any agent/custom attributes on it, but an error is noticed and recorded against the span, a FrozenError: can't modify frozen Hash is thrown. This is now fixed, and errors are now correctly recorded against such span events.

• Bugfix: DistributedTracing.insert_distributed_trace_headers Supportability metric now recorded

  Previously, API calls to DistributedTracing.insert_distributed_trace_headers would lead to an exception about the missing supportability metric rather than flowing through the API implementation as intended. This would potentially lead to broken distributed traces, as the trace headers were not inserted on the API call. DistributedTracing.insert_distributed_trace_headers now correctly records the supportability metric and inserts the distributed trace headers as intended.

• Bugfix: child completions after parent completes sometimes throws exception attempting to access nil parent

  In scenarios where the child segment/span is completing after the parent in jRuby, the parent may have already been freed and no longer accessible. This would lead to attempting to calll descendant_complete on a nil object. This is fixed to protect against calling the descendant_complete in these cases.

• Feature: implements force_install_exit_handler config flag

  The force_install_exit_handler configuration flag allows an application to instruct the agent to install its graceful shutdown exit handler. This sends any locally cached data to the New Relic collector before the application shuts down. This is useful when the primary framework has an embedded Sinatra application that is otherwise detected and skips installing the exit hook for graceful shutdowns.

• Default prepend_net_instrumentation to false

  Previously, prepend_net_instrumentation defaulted to true. However, many gems are still using monkey patching on Net::HTTP, which causes compatibility issues with using prepend. Defaulting this to false minimizes instances of unexpected compatibility issues.

• Infinite tracing adds additional data to connection metadata

  Adds data from the agents connect response request_headers_map to the metadata for the connection to the infinite trace observer.

Support statement

New Relic recommends that you upgrade the agent regularly and at a minimum every 3 months. As of this release, the oldest supported version is 4.8.0.

v6.14.0

• Bugfix: Method tracers no longer cloning arguments

  Previously, when calling add_method_tracer with certain combination of arguments, it would lead to the wrapped method's arguments being cloned rather than passed to the original method for manipulation as intended. This has been fixed.

• Bugfix: Delayed Job instrumentation fixed for Ruby 2.7+

  Previously, the agent was erroneousy separating positional and keyword arguments on the instrumented method calls into Delayed Job's library. The led to Delayed job not auto-instrumenting correctly and has been fixed.

• Bugfix: Ruby 2.7+ methods sometimes erroneously attributed compiler warnings to the Agent's add_method_tracer

  The specific edge cases presented are now fixed by this release of the agent. There are still some known corner-cases that will be resolved with upcoming changes in next major release of the Agent. If you encounter a problem with adding method tracers and compiler warnings raised, please continue to submit small repoducible examples.

• Bugfix: Ruby 2.7+ fix for keyword arguments on Rack apps is unnecessary and removed

  A common fix for positional and keyword arguments for method parameters was implemented where it was not needed and led to RackApps getting extra arguments converted to keyword arguments rather than Hash when it expected one. This Ruby 2.7+ change was reverted so that Rack apps behave correctly for Ruby >= 2.7.

• Feature: captures incoming and outgoing request headers for distributed tracing

  HTTP request headers will be logged when log level is at least debug level. Similarly, request headers for exchanges with New Relic servers are now audit logged when audit logging is enabled.

• Bugfix: newrelic.yml.erb added to the configuration search path

  Previously, when a user specifies a newrelic.yml.erb and no newrelic.yml file, the agent fails to find the .erb file because it was not in the list of files searched at startup. The Ruby agent has long supported this as a means of configuring the agent programatically. The newrelic.yml.erb filename is restored to the search path and will be utilized if present. NOTE: newrelic.yml still takes precedence over newrelic.yml.erb If found, the .yml file is used instead of the .erb file. Search directories and order of traversal remain unchanged.

• Bugfix: dependency detection of Redis now works without raising an exception

  Previously, when detecting if Redis was available to instrument, the dependency detection would fail with an Exception raised (with side effect of not attempting to instrument Redis). This is now fixed with a better dependency check that resolves falsly without raising an Exception.

• Bugfix: Gracefully handles NilClass as a Middleware Class when instrumenting

  Previously, if a NilClass is passed as the Middleware Class to instrument when processing the middleware stack, the agent would fail to fully load and instrument the middleware stack. This fix gracefully skips over nil classes.

• Memory Sampler updated to recognize macOS Big Sur

  Previously, the agent was unable to recognize the platform macOS Big Sur in the memory sampler, resulting in an error being logged. The memory sampler is now able to recognize Big Sur.

• Prepend implementation of Net::HTTP instrumentation available

  There is now a config option (prepend_net_instrumentation) that will enable the agent to use prepend while instrumenting Net::HTTP. This option is set to true by default.

Support Statement

New Relic recommends that you upgrade the agent regularly and at a minimum every 3 months. As of this release, the oldest supported version is 4.5.0.